3D acoustic panel
3D Acoustic Panel Feature:
- Panel: 90kg / m3 acoustic cotton is placed in a rigid wooden structure.
- Acoustic cotton is developed for this purpose, so it is completely harmless to health.
- Exterior covered with dense acoustic silk. It is thus protected against dust.
- The 3D acoustic panel is used not only for its high sound absorption, but also for its appearance and variability.
3D acoustic panel colors:
When choosing a color, it is important to pay attention to white and broken white. Unfortunately they are very delicate due to their brightness! It gets dirty very quickly. Thus, the durability is shorter than that of acoustic panels with colored or darker colors. If you want it to be light, but without dust or handprint, you may want to choose 33 colors or 55 colors and darker silks. Of course, if you choose white, it’s no problem for us!
Wipe with a slightly damp cloth!
Its color does not fade, even over time. Do not expose to strong sunlight. Because UV rays can fade in color.
The back of each of our acoustic panels is marked and pre-drilled!
Supplied separately for transport. Then, later, at home, you will have to screw the hook screws without the aid of a tool. When unpacking, it is worth looking at the back of the acoustic panels. Screws for nylon wrapping are usually glued!
If you look at the picture well, you can see it hanging on a simple 90% bent screw. It’s very simple, like hanging one picture on the wall.
For ceiling mounting, this 90% screw should not be used. It is worth getting a half-ring screw there. At us this is called a lamp hanger!
Screw the screws provided for the acoustic panel into the pre-drilled hole in the back and hook it to the hook drilled and placed in the wall.
The wall hook does not come with the 3D acoustic panel. These must be purchased separately. You can buy it at any bolt or tool store.
We cannot add dowels and screws to the sound-absorbing panels, as there are so many walls in the apartment. Each wall requires a different approach. It depends on the type of wall and plaster!
- brick walls
Be sure to keep it strong. Because Perfect Acoustic products are made of only high quality material, they are heavy. As we know, only heavy, high-density, fibrous material can cope with bass.
If possible, avoid 3D acoustic panels against the wall. The more the falcon stops, the more sound absorption it has. Thus, further reducing the echo and deeper frequencies.
A little acoustic evasion:
Echo is generally referred to as sound above 300Hz. If a living room is very echoing and the customer is very annoyed, you usually think of high pitched sounds. That’s when the applause comes. If you applaud such a room, the sound will bounce around and create a very annoying rattling echo. This can be quite misleading!
One applause is usually around 1Khz. If you want to reverberate a smooth daytime echo with a 3D acoustic panel, the product is a perfectly good choice. On the other hand, the situation is different when a dear customer comes to us with the same problems, but with the intent of hi-fi or cinema. In this case, the task is already more complex. Hi-fi or cinema sounds can produce sounds up to 30Hz. Other products also need to be purchased if you want to hear even sound.
Primarily the essential acoustic membranes:
If we can spend a little more on our room, then acoustic diffusers can come in:
Why do we need broadband acoustic panels?
A broadband acoustic element is needed in rooms where the reverberation time (echo) is higher than the reference value.
In most cases, we use this acoustic panel because of its very wide applicability, damping unwanted sound waves up to 40-20,000Hz.
Why are our acoustic panels better than those of other manufacturers?
Perfect Acoustic takes great care of material quality. Thus, only the best sound absorption acoustic panels are marketed and manufactured. It is not our aim, just to increase profits, to make acoustic panels of poor quality material, such as: sponge, styrofoam, xps, polyester foam, etc…
Unfortunately, they are completely unsuitable for evenly absorbing sound. Mostly they can handle sound above 600-800Hz. But I do it to a great extent. This creates a distorted and completely upset sound.
In contrast, our sound absorbing panel disrupts unwanted subwoofers from 40 Hz, giving you a more detailed and captured bass while keeping the high pitch, air and sound.
3D acoustic panel design:
3D acoustic panel design allows you to create a new design for your studio or home.
Thanks to its 60x60cm sides, it can be rotated to get a different shape.
If they receive LED illumination, using the shade can further enhance their relief. Try to mix the colors and create a fun and cozy space!
Classic Broadband Panels – Sound Absorption Features:
40 Hz to 20,000 Hz attenuates unwanted sound waves.
Acoustic panels are very rarely in stock. However, there is an abundance of raw materials in every product. Therefore, we can produce you in a very short time, not only the 3D acoustic panel, but also sound absorbing membranes or acoustic diffusers.
Preparation time is usually 1-2 weeks! Hungary has a shorter deadline as it does not have to be packed, so the sound-absorbing panels are completed sooner.