Sound acoustic panels with Membrane- Effective bass absorbing acoustic panels

Sound acoustic panels with membranes

A bass trap or deep sound absorbing membrane is essential for the pure sound. With it we can accomplish the most important and difficult task of creating the right acoustics: attenuating the deep.

Why it is necessary to attenuate the bass tones?

For low sounds below 150 Hz, the reverberation time increases.

#gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

In practice, this means that we do not hear the real amount and quality of deep sounds in the room, but the sound of the room. Distorted deep-toned can ruin the sound experience, we cannot fully enjoy the movie or the music.

How do bass sound membranes help?

We work with deep tone captivating membranes mainly due to the reverberation damping. The deep acoustic elements with membrane is an acoustic element that reduces excessive acoustic waves within a narrower frequency range.

In contrast to acoustic membranes — broadband panel cannot attenuate sub-bass frequency effectively enough — in these ranges, membranes absorb deep sounds significantly more efficiently.

Special acoustic panels are made using premium  quality materials, in the thickness required to attenuate the low.

Thanks to careful workmanship and precise fitting, after proper acoustic measurement and precise setting, we can achieve a much cleaner, airier, more lifelike and more pleasant tone with their help.

Why is acoustic sponge, foam, Styrofoam not a good solution?

The deep-toned wavelength is larger than the trebles. Therefore, acoustic panels made of other types of material are needed to absorb low.

Deep sounds can only be attenuated with a dense fibrous high specific gravity acoustic absorber or an acoustically tuned membrane.

Many people make the mistake of cover their walls with  acoustic sponges, but the expected effect is missed; on the contrary, the soft, light, soft-sponge, styrofoam, acoustic foam, absorbs the higher tones,  further amplifying the deep tones they originally intended to attenuate.

studio , acoustic measurement

How to use the bass acoustic elements with membrane?

⦁ Low sounds should be attenuated first in the corners, then on the side walls – especially the front side – and behind the listener position.
⦁ When possible, do not place deep sound insulation membranes directly to the wall, but keep a distance of  10 cm.
⦁ Do not forget one of the most important parts of the room, the ceiling. Because this area is empty, standing waves can propagate unhindered, causing huge highlighting or tearing in the low ranges.

In what rooms can we use the acoustic bass traps?

#gallery-2 { margin: auto; } #gallery-2 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-2 img { border: 2px solid #cfcfcf; } #gallery-2 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

Sound insulation membrane can be used in studios, cinema rooms, hi-fi rooms, and possibly in the living room.

⦁ In cases where other sound absorption panels are no longer providing sufficient attenuation in the deep ranges.
⦁ In rooms where treble frequencies are too attenuated compared to the low ones.

If you only get one thing, be it!

Multiple panels may be required to achieve the Perfect Acoustic effect. If the conditions of the room do not allow the placement of the right amount of acoustic panels, the deep soundproofing membranes should be used in case as well.

With the Bass Trap you can enjoy the following benefits:

⦁ Cleaner, smoother and more lifelike sound.
⦁ Perfect noise reduction, only the real bass in  music-movie will fill the room.
⦁ Decorative accessories for your living room: In addition to  perfect sound, we also place emphasis on appearance. We work with quality materials – wood and leather, imitation leather, acoustic silk – and realize our own ideas – our own photo, printed design, custom size.

#gallery-3 { margin: auto; } #gallery-3 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-3 img { border: 2px solid #cfcfcf; } #gallery-3 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */
Why is a deep sound-absorbing membrane made by Perfect Acoustics a good choice?
With Expertise and experience

In addition to a high level of professionalism, we also use the experience of the past years in the design and production our products.

With maximum efficiency

Our deep-soundproofing membranes, made with unique technology, still have the highest sound absorption (insulation) coefficients on the market today.

In addition to acoustic efficiency, aesthetic appearance is also very important when designing our deep acoustic elements with membranes specifically for the sub-bass range.

In addition to demanding workmanship and material selection, it is essential that our products fits the style of your studio, living room or cinema room.

Practical placement, easy layout:

In addition to acoustic efficiency and aesthetic appearance, we also strive for practical placement.

– Due to their size and weight, our deep soundproofing membranes are not only wall-mounted, but also stand on their own feet. This allows them to act as a movable, mobile acoustic panel.

– Our deep acoustic absorption membranes are also pre-drilled with screw holes to facilitate installation on the wall or ceiling acoustic panels.

#gallery-4 { margin: auto; } #gallery-4 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-4 img { border: 2px solid #cfcfcf; } #gallery-4 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

What materials do we work with?

Depending on the model, the bass trap can be made of wood or leather. The main problem is the attenuation of deep-toned below 70 Hz, as dense fiber absorbers are not suitable for this.

However, wood or leather deep acoustic insulation membrane sheets vibrate to dampen unwanted deep sound waves from 30Hz. Wood membranes attenuate up to 30-200Hz, artificial leather membranes up to 30-600Hz.

Appearance of our products:

In addition to efficiency, we place great emphasis on appearance, which is why we offer a wide range of aesthetics for our acoustic bass traps:

⦁ 16 different colours of acoustic silk.
⦁ Artificial leather membrane material of different colours and structures.
⦁ Optional printed desing in stock.
⦁ You can select from your own photo.
⦁ Custom size production.
⦁ Even creating of hidden sound absorbers.

We can provide the best acoustic treatment by using soundproofing panels. It is absolutely necessary to reduce noise in some form in order to create a calm, peaceful form of life. Acoustic aspects are rarely cared for during the construction of building estates, on account of which we  suffer from noise pollution full many times. If we reduce noise, we can create ideal acoustics in the office or recording studios. You will only find the audio recording suitable if you do not leave the treatment of ceilings and walls.

Avoid items made with the “DIY” method!

Showing all 5 results

Sound acoustic panels with membranes

A bass trap or deep sound absorbing membrane is essential for the pure sound. With it we can accomplish the most important and difficult task of creating the right acoustics: attenuating the deep.

Why it is necessary to attenuate the bass tones?

For low sounds below 150 Hz, the reverberation time increases.

In practice, this means that we do not hear the real amount and quality of deep sounds in the room, but the sound of the room. Distorted deep-toned can ruin the sound experience, we cannot fully enjoy the movie or the music.

How do bass sound membranes help?

We work with deep tone captivating membranes mainly due to the reverberation damping. The deep acoustic elements with membrane is an acoustic element that reduces excessive acoustic waves within a narrower frequency range.

In contrast to acoustic membranes — broadband panel cannot attenuate sub-bass frequency effectively enough — in these ranges, membranes absorb deep sounds significantly more efficiently.

Special acoustic panels are made using premium  quality materials, in the thickness required to attenuate the low.

Thanks to careful workmanship and precise fitting, after proper acoustic measurement and precise setting, we can achieve a much cleaner, airier, more lifelike and more pleasant tone with their help.

Why is acoustic sponge, foam, Styrofoam not a good solution?

The deep-toned wavelength is larger than the trebles. Therefore, acoustic panels made of other types of material are needed to absorb low.

Deep sounds can only be attenuated with a dense fibrous high specific gravity acoustic absorber or an acoustically tuned membrane.

Many people make the mistake of cover their walls with  acoustic sponges, but the expected effect is missed; on the contrary, the soft, light, soft-sponge, styrofoam, acoustic foam, absorbs the higher tones,  further amplifying the deep tones they originally intended to attenuate.

studio , acoustic measurement

How to use the bass acoustic elements with membrane?

⦁ Low sounds should be attenuated first in the corners, then on the side walls – especially the front side – and behind the listener position.
⦁ When possible, do not place deep sound insulation membranes directly to the wall, but keep a distance of  10 cm.
⦁ Do not forget one of the most important parts of the room, the ceiling. Because this area is empty, standing waves can propagate unhindered, causing huge highlighting or tearing in the low ranges.

In what rooms can we use the acoustic bass traps?

Sound insulation membrane can be used in studios, cinema rooms, hi-fi rooms, and possibly in the living room.

⦁ In cases where other sound absorption panels are no longer providing sufficient attenuation in the deep ranges.
⦁ In rooms where treble frequencies are too attenuated compared to the low ones.

If you only get one thing, be it!

Multiple panels may be required to achieve the Perfect Acoustic effect. If the conditions of the room do not allow the placement of the right amount of acoustic panels, the deep soundproofing membranes should be used in case as well.

With the Bass Trap you can enjoy the following benefits:

⦁ Cleaner, smoother and more lifelike sound.
⦁ Perfect noise reduction, only the real bass in  music-movie will fill the room.
⦁ Decorative accessories for your living room: In addition to  perfect sound, we also place emphasis on appearance. We work with quality materials – wood and leather, imitation leather, acoustic silk – and realize our own ideas – our own photo, printed design, custom size.

Why is a deep sound-absorbing membrane made by Perfect Acoustics a good choice?
With Expertise and experience

In addition to a high level of professionalism, we also use the experience of the past years in the design and production our products.

With maximum efficiency

Our deep-soundproofing membranes, made with unique technology, still have the highest sound absorption (insulation) coefficients on the market today.

In addition to acoustic efficiency, aesthetic appearance is also very important when designing our deep acoustic elements with membranes specifically for the sub-bass range.

In addition to demanding workmanship and material selection, it is essential that our products fits the style of your studio, living room or cinema room.

Practical placement, easy layout:

In addition to acoustic efficiency and aesthetic appearance, we also strive for practical placement.

– Due to their size and weight, our deep soundproofing membranes are not only wall-mounted, but also stand on their own feet. This allows them to act as a movable, mobile acoustic panel.

– Our deep acoustic absorption membranes are also pre-drilled with screw holes to facilitate installation on the wall or ceiling acoustic panels.

What materials do we work with?

Depending on the model, the bass trap can be made of wood or leather. The main problem is the attenuation of deep-toned below 70 Hz, as dense fiber absorbers are not suitable for this.

However, wood or leather deep acoustic insulation membrane sheets vibrate to dampen unwanted deep sound waves from 30Hz. Wood membranes attenuate up to 30-200Hz, artificial leather membranes up to 30-600Hz.

Appearance of our products:

In addition to efficiency, we place great emphasis on appearance, which is why we offer a wide range of aesthetics for our acoustic bass traps:

⦁ 16 different colours of acoustic silk.
⦁ Artificial leather membrane material of different colours and structures.
⦁ Optional printed desing in stock.
⦁ You can select from your own photo.
⦁ Custom size production.
⦁ Even creating of hidden sound absorbers.

We can provide the best acoustic treatment by using soundproofing panels. It is absolutely necessary to reduce noise in some form in order to create a calm, peaceful form of life. Acoustic aspects are rarely cared for during the construction of building estates, on account of which we  suffer from noise pollution full many times. If we reduce noise, we can create ideal acoustics in the office or recording studios. You will only find the audio recording suitable if you do not leave the treatment of ceilings and walls.

Avoid items made with the “DIY” method!